Industries · I-08
IBC totes for
car wash & facility services.
Short answer
- Rinsed grade
- 120-gal half-height for low ceilings
- Camlock adapters
Quote for car wash & facility services
What matters here
Three things that decide a car wash & facility services order
- 01
Grade follows the application rather than the budget. Decide what goes in the container first; the size, base and paperwork all follow from that one answer.
- 02
Base type follows the floor. Sanitary floors need plastic or composite; industrial and outdoor duty wants steel; wood only makes sense on a one-way trip.
- 03
Gasket compound follows the chemistry. It is a nine-dollar decision that causes most of the leaks we are asked to investigate.
Requirements checklist
- Rinsed grade
- 120-gal half-height for low ceilings
- Camlock adapters
Specify this grade
Rinsed
Triple-rinsed at the filler or at our yard, visually clean, but not pressure-tested and not re-certified. The honest middle of the market.
Typical price: $95 – $165
Compare all gradesWhat goes wrong
- Grade claims with no paperwork behind them
- Clearance assumed rather than measured — the tote is 40 inches at its narrowest
- Filled weight at your product density exceeding your lift or floor rating
Typical orders
What car wash & facility services customers actually buy
Real configurations from our order book, with the detail that is easy to get wrong.
| Product | Grade | Configuration |
|---|---|---|
| General aqueous product | Reconditioned | 275 gal, EPDM, steel base |
| Non-potable water storage | Rinsed | 330 gal on blocks |
| Fabrication / cut-down stock | As-is | 275 gal, condition irrelevant |
Short answer
- Grade: Rinsed
- Rinsed grade
- 120-gal half-height for low ceilings
- Ask us to recommend down a grade if the job allows it
Other sectors
Nearby industries
Compare requirements
Food & Beverage
Syrup, brine, concentrate, edible oil and brewing liquor.
Agriculture & Growing
Liquid fertiliser, crop protection, nutrient dosing, livestock water and irrigation buffer storage.
Chemical & Industrial
Surfactants, solvents, acids, coolants and packing-group liquids.
All Industries
Eleven sectors compared in one table.
Grades Explained
The six grades, processes and price bands.
Request a Quote
Full RFQ with grade and freight detail.
Specifying for this sector
A car wash & facility services order, line by line
The configuration decisions that matter here, with our default and when to override it.
| Decision | For this sector | Why |
|---|---|---|
| Grade | Rinsed | Grade follows the application rather than the budget. |
| Base type | Steel unless the floor requires otherwise | Decided by the floor the container stands on |
| Gasket compound | Matched to the product — tell us the liquid | The commonest cause of a weeping valve |
| Outlet size | DN50 unless the product is viscous | DN80 roughly halves drain time |
| Documentation | Prior-contents disclosure | What an auditor or inspector will ask for |
| Quantity | Consolidate where you can | Freight per unit falls by two thirds from 4 to 42 units |
Short answer
- Rinsed grade
- 120-gal half-height for low ceilings
- Camlock adapters
From the Yard Journal
Longer pieces from the people who run the wash line, the test bay and the trading desk.
18 December 2025 · 4 min
Our grading floor is deliberately boring
Six labelled bays, one decision per unit, no judgement calls allowed at the end of a shift. Interesting processes produce inconsistent grades.
Priya Raghunathan · Head of reconditioning
Read21 May 2026 · 4 min
What a crushed cage tells you about the bottle inside
Counterintuitively, the worse the cage looks, the better the odds on the bottle. We pulled three years of intake records to check.
Priya Raghunathan · Head of reconditioning
Read6 December 2022 · 6 min
Reading a cage weld: a field guide to the joint that kills totes
The upright-to-rail joint decides whether a cage is rebottled or baled. Here is what we look at, in what order, and why a bowed upright is fine but a kinked one is not.
Priya Raghunathan · Head of reconditioning
Read
Next move
Tell us what goes in it.
For car wash & facility services we need the product, the quantity, your postal code and whoever audits you. That is enough for grades, photos and landed freight within one business day.